TagMatiks AT Lite - Android Help

Setting up Your RFID Device - Caen qID Mini

Summary

This section contains setup information for using the CAEN R1170I qID mini Key for Bluetooth UHF RFID Reader sled readers with TagMatiks Asset Tracking Lite Software.

Pre-requisites

The qID mini reader should be sufficiently charged.
Windows devices should be sufficiently charged.
Device must be in EASY2RD mode.
The Bluetooth of the Windows device and qID mini reader should be on.
Windows devices should be kept near to the qID mini reader.
For connecting with Caen qID Mini in TagMatiks AT Lite, you must pair the device in the settings app using Bluetooth.

Please follow the steps below to pair your qID Mini reader:

Caen qID Mini can easily be turned ON by pressing the power button. The power LED will become green in color as an indication of the reader being awake and ready to connect.

Pairing of Caen qID Mini reader with Android device

1. You’ll need to pair the Caen qID Mini reader with your Android device using the device’s Bluetooth pairing process, before connecting it with TagMatiks AT Lite application.

2. Turn on the Bluetooth of the device and select the qIDmini-16160102 from the available device list as shown in the below image.

3. The device will ask for the confirmation of the connection , Tap on “Pair” to complete the connection.

Pairing with TagMatiks AT Lite:

1. Open TagMatiks AT Lite and tap the “Settings” button from the bottom right-hand side of application.

2. Select the “Manage Reader” option to see the list of the readers.

3. Tap on ‘CAEN RFID Readers” to connect Caen qID Mini with the application.

4. Tap on the “qIDmini-16160102” to successfully make the connection between the TagMatiks AT Lite application & Caen qID Mini Reader.

Note: 00:06:66:7F:17:53 is the MAC Address of the device.

5. An acknowledgment will appear stating that the “qIDmini-16160102 has connected successfully”

You can also configure the settings of the reader as shown in the image below.