The E-seal RFID Tag is a radio frequency device that transmits information when interrogated by a RAIN RFID fixed portal or mobile reader. It combines mechanical security of standard seals with the electronic security offered by RAIN RFID technology.
It is in tamper evidence where the status of the seal (TAMPERED / NOT TAMPERED) is immediately detected when it passes through a RFID gate or mobile reader. Any tampering event is permanently stored in the E-seal chip’s memory . This activates the TAG TAMPER ALARM, which immediately provides the status of the seal either TAMPERED or NOT TAMPERED.
This document describes how to configure the E-Seal sensor in TagMatiks AT Lite Windows application.
SKU: TAG-ESEAL-T1
1. Open the TagMatiks AT Lite application and login into it.
2. Click on the “Sensor Profile” button from the left hand side of application.
3. Click on “Add Sensor Profile” from the top right-hand side of the application.
4. Enter the sensor profile name
5. Select the sensor type “E-seal” from dropdown.
6. You can click on checkbox to Notification on E-seal Tempered.
7. On saving the Sensor profile a popup will open stating that “Sensor profile saved successfully”.
8. Click on the “OK” button to close the Popup.
9. Please click on “Create Asset” button from the left-hand side of application
10. Enter the asset details and click on the “Sensor profile” field to select the sensor profile.
11. Select on “E-seal” from the list of sensors profile
12. Click on “Select” button to link the sensor profile and save the asset
